DEMA Guide Pin
Given the tougher technical requirements coming from industry we have made it our task to develop a high value cylindrical pin which is uniquely cost effective and the optimum for usage.
The benefits are obvious.
- Conforms to DIN EN ISO 8734 and DIN EN ISO 2338
- Non-cutting processing
- Ideally suited for automatic assembly - by two parabolic rounded ends
- Therefore no chip formation during assembly
- Environmental friendly production by saving of raw material and auxiliaries
- Free choice of material
- Cost savings (on middle to mass series) by using high performance special machines
Presently we can offer the advantages of the DEMA Guide-Pin for the following diameters and lengths:
| Diameter: | 4 | 5 | 6 | 7 | 8 | 10 | 12 | 14 | 16 | 18 |
|---|---|---|---|---|---|---|---|---|---|---|
| length from: | 10 | 8 | 8 | 10 | 12 | 12 | 14 | 16 | 25 | 25 |
| length up to: | 50 | 60 | 60 | 80 | 100 | 100 | 115 | 120 | 120 | 120 |
| R: | 0,3 | 0,6 | 0,6 | 0,8 | 1,0 | 1,0 | 1,2 | 1,2 | 1,2 | 1,2 |
| d≈: | 3,0 | 4,0 | 4,5 | 5,0 | 6,0 | 8,0 | 10,0 | 11,0 | 12,0 | 14,0 |
| k≈: | 0,15 | 2,0 | 0,25 | 0,3 | 0,4 | 0,5 | 0,5 | 0,5 | 0,5 | 0,5 |
| c≈: | 0,8 | 0,8 | 1,2 | 1,4 | 1,6 | 2,0 | 2,5 | 2,7 | 3,5 | 3,5 |